The Vi-Link AF100 Industrial Point-to-Point Wireless Ethernet Bridge is designed to operate in a high-temperature NEMA environment with 1* 10/100Mbps TX and 2.4 GHz Air-Fiber RF Antenna. It is primarily intended for large, higher speed/bandwidth-demanding workgroups that require expansion of the Ethernet network. It can extend the conventional 10M and 100M Ethernet up to 10 Km via the RF Antenna. It is a high-performance, cost-effective, and flexible solution for many WAN/LAN campus network applications.
The extended temperature capability for meeting NEMA specifications satisfies very critical applications requiring high-quality data transmission performance with high reliability.
Applications include ITS Intelligent Traffic System, Metro Operation, HDTV Broadcasting System, IP cameras Surveillance, Homeland Security, Utility Management, Premise Networks, Military Hardened applications, or anything requiring high-speed Ethernet Network performance.

1* 10/100M Industrial Ethernet Point to Point Transmission
Flash: 16MB, DDR: 64MB
frequency: 2.4GHz
4G Router protocol: 802.11 a / n
Max rate: 300Mbps @4G
Reset: Press 6~10 seconds for factory resetting.
Indicators: Power, Link, Data
Dimension: 10.5″ × 3.5″ × 2.5″
Weight: 1lb
Operation Temperature: -34°C to 74°C
Storage: -40°C to 85°C
Humidity: 5%~95% non-condensing
Surge Protection Standard: ±2KV, IP Grade: IP65
Wireless: Intelligent dynamic polling, automatic channel selection, automatic modulation mode selection, automatic transmission power control (ATPC)
Wireless Safety: WPA/WPA2 personal encryption, WPA/WPA2 enterprise encryption, WACL, user isolation Wireless QoS
TDMA implements 4 queue priority
Network mode: IPv4 IPv6
VLAN: Support VLAN and VLAN transparent transmission
WAN protocol: Static IP, DHCP client Service, DHCP service, SNMP service, NTP client, route tracking, ping watchdog Management
HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet