Vi-Link AF35 is a 300Mbps Point to Multipoint Ethernet Network Bridge transmission up to 10 Km; It Comply with IEEE 802.11b/g/n standard,16 MB flash,64 MB SDRAM, 5dBi omni antenna, 500mW high power, Wi-Fi signal coverage. With AP, Router, and Wi-Fi Repeater operation mode, it can transmit a Wi-Fi signal in a certain place for outdoor users and bridge the existing Wi-Fi signal to extend the range.
The AF30 cover is waterproof, dustproof, sunscreen shell, temperature adaptive, and board protective, suit for outdoor Wi-Fi networking projects. it supports Power over Ethernet, supports passive PoE/IEEE 802.3af PoE

CPU: AR9344
Flash: 16MB, DDR: 64MB
5G frequency: 5.150GHz~5.850GHz
5G WIFI protocol: 802.11 a / n
Max rate: 300Mbps @5G EVM
802.11a_54M: ≤-25 dB;802.11n_MCS7: ≤-28 dB ppm ±20ppm
WAN: 1*10/100M WAN, support 24V POE
LAN: 1*10/100M LAN
Power: PoE 24V/1A
Reset: Press 6~10 seconds for factory resetting.
Indicators: SYS, WAN, LAN, 5G WIFI, Signal*4
Dimension: 10.5″ × 3.5″ × 2.5″
Weight: 0.7lb
Operation Temperature: -30°C to 55°C
Storage: -40°C to 70°C
Humidity: 5%~95% Non-Condensing
Surge Protection Standard: ±2KV, IP Grade: IP65
ESD: Air ±8K, Touch ±6K
Electrical Surge
Common Mode: 2K, Differential Mode: 1K
Access Point (Automatic WDS), Access Point (TDMA3), Site (WDS/TDMA3), Site (ARPNAT)
Wireless: Intelligent dynamic polling, automatic channel selection, automatic modulation mode selection, automatic transmission power control (ATPC)
Wireless Safety: WPA/WPA2 personal encryption, WPA/WPA2 enterprise encryption, WACL, user isolation Wireless QoS
TDMA implements 4 queue priority
Network mode: IPv4 IPv6
VLAN: Support VLAN and VLAN transparent transmission
WAN protocol: Static IP, DHCP client Service, DHCP service, SNMP service, NTP client, route tracking, ping watchdog Management
HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet